Process of proofreading, drawing review, drawing tracing and printing of mold design
Proofreading, reviewing, tracing and printing
(1) Relationship between mould and its parts and plastic part drawings
Whether the material, hardness, dimensional accuracy and structure of the mold and mold parts meet the requirements of the plastic part drawing.
(2) Plastic parts
Whether the flow, shrinkage cavity, weld line, crack, and demoulding slope of plastic material flow affect the requirements for the use performance, dimensional accuracy, surface quality, etc. of plastic parts. Whether the pattern design is insufficient, whether the processing is simple, and whether the shrinkage of the molding material is selected correctly.
(3) Molding equipment
Whether the injection volume, injection pressure and clamping force are enough, whether there are problems in the mold installation, the south core and demoulding of plastic parts, and whether the nozzle of the injection machine is in correct contact with the mouthpiece.
(4) Mold structure
1) Whether the parting surface position and finish machining accuracy meet the requirements, whether there will be overflow, and whether the plastic parts can be kept at the side of the mold with ejector after opening the mold.
2) Whether the demoulding method is correct, whether the size, position and quantity of the extension rod and push tube are appropriate, whether the push plate will be stuck by the core, and whether the formed parts will be scratched.
3) Mold temperature regulation. Power and quantity of heater; Whether the location, size and quantity of the cooling medium flow line are appropriate.
4) How to deal with the side concave of plastic parts, and whether the mechanism for removing the side concave is appropriate, such as whether the slider and push rod in the inclined guide pillar core pulling mechanism interfere with each other.
5) Whether the position and size of the pouring and exhaust system are appropriate.
(5) Design drawings
1) Whether the placement positions of each mold part on the assembly drawing are appropriate, whether the representation is clear, and whether there is any omission
2) The part number and name on the part drawing, the manufacturing quantity, whether the parts are internally made or purchased, whether they are standard parts or non-standard parts, whether the parts' fitting processing accuracy, the correction processing and allowance of high-precision dimensions of molded plastic parts, and whether the materials, heat treatment, surface treatment, and surface finishing degree of mold parts are clearly marked and described.
3) Working dimensions and fitting dimensions of main parts and formed parts. The size figures should be correct and should not be converted by the manufacturer.
4) Check whether the view position and projection of all part drawings and general assembly drawings are correct, whether the drawing method conforms to the drawing national standard, and whether there are missing dimensions.
(6) Check machining performance
Whether the geometric structure, view drawing, dimension mark, etc. of all parts are conducive to processing
(7) Main working dimensions of recalculation aids
1) In principle, the professional proofreading shall be carried out according to the self proofreading project of the designer; However, it should focus on the structural principle, process performance and operation safety.
2) When drawing, first digest the figure, draw according to the national standard requirements, and fill in all dimensions and technical requirements. After tracing, proofread and sign.
3) The traced base drawing shall be submitted to the designer for proofreading and signature. It is customary for the relevant technicians of the tool manufacturer to review, countersign, check the manufacturing process, and then submit it to the sun.
(8) Prepare manufacturing process card
1) The technician of the tool manufacturer shall prepare the manufacturing process card and prepare for processing and manufacturing.
2) The inspection shall be strengthened in the manufacturing process of mold parts, and the inspection shall focus on the dimensional accuracy. After the mold assembly is completed, the inspector shall inspect it according to the mold inspection table, mainly to check whether the performance of mold parts is good. Only in this way can the manufacturing quality of the mold be guaranteed.
Mold design is a critical aspect of the mold processing cycle. To ensure that the mold meets the required specifications, several steps must be taken, including proofreading, drawing review, drawing tracing, and printing. In this article, we will discuss the process of proofreading, drawing review, drawing tracing, and printing in mold design.
The first step in mold design is proofreading the design to ensure that it meets the required specifications. Proofreading involves checking the design for accuracy, ensuring that all dimensions are correct, and verifying that the design meets the customer's requirements. This process helps identify any errors or issues that may impact the mold's functionality and ensures that the mold design meets the required quality standards.
Once the design has been proofread, the next step is drawing review. Drawing review involves verifying that the design meets all required safety and regulatory standards, including any applicable industry or government regulations. Drawing review helps ensure that the mold design is safe to use and meets all legal requirements.
The next step is drawing tracing, which involves tracing the design onto a template or a specialized tracing paper. This process allows the mold manufacturer to create an accurate and detailed representation of the mold design, which can then be used to create the mold.
After the drawing has been traced, it is printed onto specialized paper using a high-quality printer. Printing the design onto specialized paper ensures that the design is accurate, clear, and easy to read, which is critical during the mold manufacturing process.
In conclusion, proofreading, drawing review, drawing tracing, and printing are essential steps in the mold design process. These steps help ensure that the mold meets all required specifications, including accuracy, safety, and regulatory compliance. By taking the time to review and verify the mold design, manufacturers can ensure that the mold meets the required quality standards and produces high-quality parts.