What are the requirements for drawing all parts in mold design?
Drawing all parts
The sequence of drawing the part drawing from the general assembly drawing of the mold shall be: first inside then outside, first complex then simple, first molding parts, then structural parts.
1) Graphic requirements: be sure to draw according to the scale, and allow zooming in or out. The view selection is reasonable, the projection is correct, and the layout is appropriate. In order to make the processing patent number easy to understand and easy to assemble, the graphics should be consistent with the general assembly drawing as much as possible, and the graphics should be clear.
2) Dimensioning shall be unified, centralized, orderly and complete. The order of dimensioning is: first mark the size of the main parts and the die inclination, then mark the fitting size, and then mark all the dimensions. On the drawing of non major parts, the matching dimensions shall be marked first, and then all dimensions shall be marked.
3) Surface roughness. Mark the most applied roughness on the upper right corner of the drawing, such as "Other 3.2" Other roughness symbols shall be marked on each surface of the part.
4) Other contents, such as part name, mold drawing number, material trademark, heat treatment and hardness requirements, surface treatment, drawing proportion, machining accuracy of free size, technical description, etc., shall be filled in correctly.
Mold design is a complex process that requires a high level of technical expertise and attention to detail. One of the most critical aspects of mold design is creating accurate and detailed drawings for all parts of the mold. In this article, we will discuss the requirements for drawing all parts in mold design.
- Clear and Accurate Dimensions: All parts of the mold must have clear and accurate dimensions to ensure they fit together correctly. The dimensions should be labeled with tolerance values to ensure that the finished mold functions as intended.
- Appropriate Views: The drawing should provide appropriate views for each part, including a top view, bottom view, and side view. These views should be clearly labeled to avoid confusion during the manufacturing process.
- Material Specification: The drawing should specify the material used for each part of the mold. The choice of material is critical, as it affects the performance and durability of the finished mold.
- Surface Finish: The drawing should specify the required surface finish for each part of the mold. This information is critical to ensure that the mold produces parts with the required level of finish.
- Tolerances: Tolerances are critical for ensuring that all parts of the mold fit together correctly. The drawing should specify the tolerances for each part, ensuring that the final mold functions as intended.
- Assembly Instructions: The drawing should provide clear and concise assembly instructions for all parts of the mold. This information is critical to ensure that the mold is assembled correctly and that it functions as intended.
- Bill of Materials: The drawing should include a bill of materials, which lists all the parts required for the mold. This information is critical for tracking and ordering the required components.
In conclusion, drawing all parts of the mold in mold design is a critical step in ensuring the success of the manufacturing process. The requirements for the drawing include clear and accurate dimensions, appropriate views, material specifications, surface finish, tolerances, assembly instructions, and a bill of materials. By meeting these requirements, mold designers can ensure that the final mold produces parts of the desired quality and meets the necessary performance standards.
